Helium command reference
These are the full outputs of each executable's -help flag. Most of these options can be specified in the helium.conf file (remove the leading - when doing so)
WARNING
Use these only when you know what you are doing. While most of the commands only return information and are harmless, some are not and wrong use can break your wallet or lead to the loss of funds.
Note that Zerocoin functions (zHLM) are currently disabled.
RPC Console
== Blockchain ==
findserial "serial"
getaccumulatorvalues "height"
getbestblockhash
getblock "hash" ( verbose )
getblockchaininfo
getblockcount
getblockhash index
getblockheader "hash" ( verbose )
getchaintips
getdifficulty
getfeeinfo blocks
getmempoolinfo
getrawmempool ( verbose )
gettxout "txid" n ( includemempool )
gettxoutsetinfo
verifychain ( numblocks )
== Control ==
getinfo
help ( "command" )
stop
== Generating ==
getgenerate
gethashespersec
setgenerate generate ( genproclimit )
== Helium ==
checkbudgets
createmasternodebroadcast "command" ( "alias")
createmasternodekey
decodemasternodebroadcast "hexstring"
getbudgetinfo ( "proposal" )
getbudgetprojection
getbudgetvotes "proposal-name"
getmasternodecount
getmasternodeoutputs
getmasternodescores ( blocks )
getmasternodestatus
getmasternodewinners ( blocks "filter" )
getnextsuperblock
getpoolinfo
listmasternodeconf ( "filter" )
listmasternodes ( "filter" )
masternode "command"...
masternodeconnect "address"
masternodecurrent
masternodedebug
mnbudget "command"... ( "passphrase" )
mnbudgetrawvote "masternode-tx-hash" masternode-tx-index "proposal-hash" yes|no time "vote-sig"
mnbudgetvote "local|many|alias" "votehash" "yes|no" ( "alias" )
mnfinalbudget "command"... ( "passphrase" )
mnsync "status|reset"
preparebudget "proposal-name" "url" payment-count block-start "address" monthy-payment
relaymasternodebroadcast "hexstring"
spork "name" ( value )
startmasternode "local|all|many|missing|disabled|alias" lockwallet ( "alias" )
submitbudget "proposal-name" "url" payment-count block-start "address" monthy-payment "fee-tx"
== Mining ==
getblocktemplate ( "jsonrequestobject" )
getmininginfo
getnetworkhashps ( blocks height )
prioritisetransaction <txid> <priority delta> <fee delta>
reservebalance ( reserve amount )
submitblock "hexdata" ( "jsonparametersobject" )
== Network ==
addnode "node" "add|remove|onetry"
clearbanned
disconnectnode "node"
getaddednodeinfo dns ( "node" )
getconnectioncount
getnettotals
getnetworkinfo
getpeerinfo
listbanned
ping
setban "ip(/netmask)" "add|remove" (bantime) (absolute)
== Rawtransactions ==
createrawtransaction [{"txid":"id","vout":n},...] {"address":amount,...}
decoderawtransaction "hexstring"
decodescript "hex"
getrawtransaction "txid" ( verbose )
sendrawtransaction "hexstring" ( allowhighfees )
signrawtransaction "hexstring" ( [{"txid":"id","vout":n,"scriptPubKey":"hex","redeemScript":"hex"},...] ["privatekey1",...] sighashtype )
== Util ==
createmultisig nrequired ["key",...]
estimatefee nblocks
estimatepriority nblocks
validateaddress "address"
verifymessage "address" "signature" "message"
== Wallet ==
addmultisigaddress nrequired ["key",...] ( "account" )
autocombinerewards enable ( threshold )
backupwallet "destination"
bip38decrypt "address"
bip38encrypt "address"
dumpprivkey "address"
dumpwallet "filename"
encryptwallet "passphrase"
getaccount "address"
getaccountaddress "account"
getaddressesbyaccount "account"
getbalance ( "account" minconf includeWatchonly )
getnewaddress ( "account" )
getrawchangeaddress
getreceivedbyaccount "account" ( minconf )
getreceivedbyaddress "address" ( minconf )
getstakesplitthreshold
getstakingstatus
gettransaction "txid" ( includeWatchonly )
getunconfirmedbalance
getwalletinfo
importaddress "address" ( "label" rescan )
importprivkey "privkey" ( "label" rescan )
importspreadprivkey "privkey" ( "label" rescan )
importwallet "filename"
keypoolrefill ( newsize )
listaccounts ( minconf includeWatchonly)
listaddressgroupings
listlockunspent
listreceivedbyaccount ( minconf includeempty includeWatchonly)
listreceivedbyaddress ( minconf includeempty includeWatchonly)
listsinceblock ( "blockhash" target-confirmations includeWatchonly)
listtransactions ( "account" count from includeWatchonly)
listunspent ( minconf maxconf ["address",...] )
lockunspent unlock [{"txid":"txid","vout":n},...]
makekeypair [prefix]
move "fromaccount" "toaccount" amount ( minconf "comment" )
multisend <command>
sendfrom "fromaccount" "toaddress" amount ( minconf "comment" "comment-to" )
sendmany "fromaccount" {"address":amount,...} ( minconf "comment" )
sendtoaddress "address" amount ( "comment" "comment-to" )
sendtoaddressix "address" amount ( "comment" "comment-to" )
setaccount "address" "account"
setstakesplitthreshold value
settxfee amount
signmessage "address" "message"
== Zerocoin ==
dzhlmstate
exportzerocoins include_spent ( denomination )
generatemintlist
getarchivedzerocoin
getspentzerocoinamount hexstring index
getzerocoinbalance
getzhlmseed
importzerocoins importdata
listmintedzerocoins
listspentzerocoins
listzerocoinamounts
mintzerocoin amount ( utxos )
reconsiderzerocoins
resetmintzerocoin ( fullscan )
resetspentzerocoin
searchdzhlm
setzhlmseed "seed"
spendzerocoin amount mintchange minimizechange securitylevel ( "address" )
heliumd
Helium Core Daemon version v0.15.2
Usage:
heliumd [options] Start Helium Core Daemon
Options:
-?
This help message
-version
Print version and exit
-alertnotify=<cmd>
Execute command when a relevant alert is received or we see a really
long fork (%s in cmd is replaced by message)
-alerts
Receive and display P2P network alerts (default: 1)
-blocknotify=<cmd>
Execute command when the best block changes (%s in cmd is replaced by
block hash)
-blocksizenotify=<cmd>
Execute command when the best block changes and its size is over (%s in
cmd is replaced by block hash, %d with the block size)
-checkblocks=<n>
How many blocks to check at startup (default: 500, 0 = all)
-conf=<file>
Specify configuration file (default: helium.conf)
-daemon
Run in the background as a daemon and accept commands
-datadir=<dir>
Specify data directory
-dbcache=<n>
Set database cache size in megabytes (4 to 4096, default: 100)
-loadblock=<file>
Imports blocks from external blk000??.dat file on startup
-maxreorg=<n>
Set the Maximum reorg depth (default: 100)
-maxorphantx=<n>
Keep at most <n> unconnectable transactions in memory (default: 100)
-par=<n>
Set the number of script verification threads (-8 to 16, 0 = auto, <0 =
leave that many cores free, default: 0)
-pid=<file>
Specify pid file (default: helium.pid)
-reindex
Rebuild block chain index from current blk000??.dat files on startup
-reindexaccumulators
Reindex the accumulator database on startup
-reindexmoneysupply
Reindex the HLM and zHLM money supply statistics on startup
-resync
Delete blockchain folders and resync from scratch on startup
-sysperms
Create new files with system default permissions, instead of umask 077
(only effective with disabled wallet functionality)
-txindex
Maintain a full transaction index, used by the getrawtransaction rpc
call (default: 0)
-forcestart
Attempt to force blockchain corruption recovery on startup
Connection options:
-addnode=<ip>
Add a node to connect to and attempt to keep the connection open
-banscore=<n>
Threshold for disconnecting misbehaving peers (default: 100)
-bantime=<n>
Number of seconds to keep misbehaving peers from reconnecting (default:
86400)
-bind=<addr>
Bind to given address and always listen on it. Use [host]:port notation
for IPv6
-connect=<ip>
Connect only to the specified node(s)
-discover
Discover own IP address (default: 1 when listening and no -externalip)
-dns
Allow DNS lookups for -addnode, -seednode and -connect (default: 1)
-dnsseed
Query for peer addresses via DNS lookup, if low on addresses (default: 1
unless -connect)
-externalip=<ip>
Specify your own public address
-forcednsseed
Always query for peer addresses via DNS lookup (default: 0)
-listen
Accept connections from outside (default: 1 if no -proxy or -connect)
-listenonion
Automatically create Tor hidden service (default: 1)
-maxconnections=<n>
Maintain at most <n> connections to peers (default: 125)
-maxreceivebuffer=<n>
Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)
-maxsendbuffer=<n>
Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)
-onion=<ip:port>
Use separate SOCKS5 proxy to reach peers via Tor hidden services
(default: -proxy)
-onlynet=<net>
Only connect to nodes in network <net> (ipv4, ipv6 or onion)
-permitbaremultisig
Relay non-P2SH multisig (default: 1)
-peerbloomfilters
Support filtering of blocks and transaction with bloom filters (default:
1)
-port=<port>
Listen for connections on <port> (default: 9009 or testnet: 19009)
-proxy=<ip:port>
Connect through SOCKS5 proxy
-proxyrandomize
Randomize credentials for every proxy connection. This enables Tor
stream isolation (default: 1)
-seednode=<ip>
Connect to a node to retrieve peer addresses, and disconnect
-timeout=<n>
Specify connection timeout in milliseconds (minimum: 1, default: 5000)
-torcontrol=<ip>:<port>
Tor control port to use if onion listening enabled (default:
127.0.0.1:9051)
-torpassword=<pass>
Tor control port password (default: empty)
-upnp
Use UPnP to map the listening port (default: 0)
-whitebind=<addr>
Bind to given address and whitelist peers connecting to it. Use
[host]:port notation for IPv6
-whitelist=<netmask>
Whitelist peers connecting from the given netmask or IP address. Can be
specified multiple times. Whitelisted peers cannot be DoS banned and
their transactions are always relayed, even if they are already in the
mempool, useful e.g. for a gateway
Wallet options:
-backuppath=<dir|file>
Specify custom backup path to add a copy of any wallet backup. If set as
dir, every backup generates a timestamped file. If set as file, will
rewrite to that file every backup.
-createwalletbackups=<n>
Number of automatic wallet backups (default: 10)
-custombackupthreshold=<n>
Number of custom location backups to retain (default: 1)
-disablewallet
Do not load the wallet and disable wallet RPC calls
-keypool=<n>
Set key pool size to <n> (default: 100)
-paytxfee=<amt>
Fee (in HLM/kB) to add to transactions you send (default: 0.00)
-rescan
Rescan the block chain for missing wallet transactions on startup
-salvagewallet
Attempt to recover private keys from a corrupt wallet.dat on startup
-sendfreetransactions
Send transactions as zero-fee transactions if possible (default: 0)
-spendzeroconfchange
Spend unconfirmed change when sending transactions (default: 1)
-disablesystemnotifications
Disable OS notifications for incoming transactions (default: 0)
-txconfirmtarget=<n>
If paytxfee is not set, include enough fee so transactions begin
confirmation on average within n blocks (default: 1)
-maxtxfee=<amt>
Maximum total fees to use in a single wallet transaction, setting too
low may abort large transactions (default: 1.00)
-upgradewallet
Upgrade wallet to latest format on startup
-wallet=<file>
Specify wallet file (within data directory) (default: wallet.dat)
-walletnotify=<cmd>
Execute command when a wallet transaction changes (%s in cmd is replaced
by TxID)
-zapwallettxes=<mode>
Delete all wallet transactions and only recover those parts of the
blockchain through -rescan on startup (1 = keep tx meta data e.g.
account owner and payment request information, 2 = drop tx meta data)
Debugging/Testing options:
-debug=<category>
Output debugging information (default: 0, supplying <category> is
optional). If <category> is not supplied, output all debugging
information.<category> can be: addrman, alert, bench, coindb, db, lock,
rand, rpc, selectcoins, tor, mempool, net, proxy, http, libevent,
helium, (obfuscation, swiftx, masternode, mnpayments, mnbudget, zero).
-gen
Generate coins (default: 0)
-genproclimit=<n>
Set the number of threads for coin generation if enabled (-1 = all
cores, default: 1)
-help-debug
Show all debugging options (usage: --help -help-debug)
-logips
Include IP addresses in debug output (default: 0)
-logtimestamps
Prepend debug output with timestamp (default: 1)
-minrelaytxfee=<amt>
Fees (in HLM/Kb) smaller than this are considered zero fee for relaying
(default: 0.0001)
-printtoconsole
Send trace/debug info to console instead of debug.log file (default: 0)
-shrinkdebugfile
Shrink debug.log file on client startup (default: 1 when no -debug)
-testnet
Use the test network
-litemode=<n>
Disable all Helium specific functionality (Masternodes, Zerocoin,
SwiftX, Budgeting) (0-1, default: 0)
Staking options:
-staking=<n>
Enable staking functionality (0-1, default: 1)
-hlmstake=<n>
Enable or disable staking functionality for HLM inputs (0-1, default: 1)
-zhlmstake=<n>
Enable or disable staking functionality for zHLM inputs (0-1, default:
1)
-reservebalance=<amt>
Keep the specified amount available for spending at all times (default:
0)
Masternode options:
-masternode=<n>
Enable the client to act as a masternode (0-1, default: 0)
-mnconf=<file>
Specify masternode configuration file (default: masternode.conf)
-mnconflock=<n>
Lock masternodes from masternode configuration file (default: 1)
-masternodeprivkey=<n>
Set the masternode private key
-masternodeaddr=<n>
Set external address:port to get to this masternode (example:
128.127.106.235:9009)
-budgetvotemode=<mode>
Change automatic finalized budget voting behavior. mode=auto: Vote for
only exact finalized budget match to my generated budget. (string,
default: auto)
Zerocoin options:
-enablezeromint=<n>
Enable automatic Zerocoin minting (0-1, default: 1)
-zeromintpercentage=<n>
Percentage of automatically minted Zerocoin (1-100, default: 10)
-preferredDenom=<n>
Preferred Denomination for automatically minted Zerocoin
(1/5/10/50/100/500/1000/5000), 0 for no preference. default: 0)
-backupzhlm=<n>
Enable automatic wallet backups triggered after each zHLM minting (0-1,
default: 1)
-zhlmbackuppath=<dir|file>
Specify custom backup path to add a copy of any automatic zHLM backup.
If set as dir, every backup generates a timestamped file. If set as
file, will rewrite to that file every backup. If backuppath is set as
well, 4 backups will happen
-reindexzerocoin=<n>
Delete all zerocoin spends and mints that have been recorded to the
blockchain database and reindex them (0-1, default: 0)
SwiftX options:
-enableswifttx=<n>
Enable SwiftX, show confirmations for locked transactions (bool,
default: true)
-swifttxdepth=<n>
Show N confirmations for a successfully locked transaction (0-9999,
default: 5)
Node relay options:
-datacarrier
Relay and mine data carrier transactions (default: 1)
-datacarriersize
Maximum size of data in data carrier transactions we relay and mine
(default: 83)
Block creation options:
-blockminsize=<n>
Set minimum block size in bytes (default: 0)
-blockmaxsize=<n>
Set maximum block size in bytes (default: 750000)
-blockprioritysize=<n>
Set maximum size of high-priority/low-fee transactions in bytes
(default: 50000)
RPC server options:
-server
Accept command line and JSON-RPC commands
-rest
Accept public REST requests (default: 0)
-rpcbind=<addr>
Bind to given address to listen for JSON-RPC connections. Use
[host]:port notation for IPv6. This option can be specified multiple
times (default: bind to all interfaces)
-rpccookiefile=<loc>
Location of the auth cookie (default: data dir)
-rpcuser=<user>
Username for JSON-RPC connections
-rpcpassword=<pw>
Password for JSON-RPC connections
-rpcport=<port>
Listen for JSON-RPC connections on <port> (default: 9019 or testnet:
19019)
-rpcallowip=<ip>
Allow JSON-RPC connections from specified source. Valid for <ip> are a
single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0)
or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified
multiple times
-rpcthreads=<n>
Set the number of threads to service RPC calls (default: 4)
helium-cli
Helium Core RPC client version v0.15.2
Usage:
helium-cli [options] <command> [params] Send command to Helium Core
helium-cli [options] help List commands
helium-cli [options] help <command> Get help for a command
Options:
-?
This help message
-conf=<file>
Specify configuration file (default: helium.conf)
-datadir=<dir>
Specify data directory
-testnet
Use the test network
-regtest
Enter regression test mode, which uses a special chain in which blocks
can be solved instantly. This is intended for regression testing tools
and app development.
-rpcconnect=<ip>
Send commands to node running on <ip> (default: 127.0.0.1)
-rpcport=<port>
Connect to JSON-RPC on <port> (default: 9019 or testnet: 19019)
-rpcwait
Wait for RPC server to start
-rpcuser=<user>
Username for JSON-RPC connections
-rpcpassword=<pw>
Password for JSON-RPC connections
-rpcclienttimeout=<n>
Timeout during HTTP requests (default: 900)
helium-tx
Helium Core helium-tx utility version v0.15.2
Usage:
helium-tx [options] <hex-tx> [commands] Update hex-encoded helium transaction
helium-tx [options] -create [commands] Create hex-encoded helium transaction
Options:
-?
This help message
-create
Create new, empty TX.
-json
Select JSON output
-txid
Output only the hex-encoded transaction id of the resultant transaction.
-regtest
Enter regression test mode, which uses a special chain in which blocks
can be solved instantly.
-testnet
Use the test network
Commands:
delin=N
Delete input N from TX
delout=N
Delete output N from TX
in=TXID:VOUT
Add input to TX
locktime=N
Set TX lock time to N
nversion=N
Set TX version to N
outaddr=VALUE:ADDRESS
Add address-based output to TX
outscript=VALUE:SCRIPT
Add raw script output to TX
sign=SIGHASH-FLAGS
Add zero or more signatures to transaction. This command requires JSON
registers:prevtxs=JSON object, privatekeys=JSON object. See
signrawtransaction docs for format of sighash flags, JSON objects.
Register Commands:
load=NAME:FILENAME
Load JSON file FILENAME into register NAME
set=NAME:JSON-STRING
Set register NAME to given JSON-STRING
helium-qt
Helium Core version v0.15.2 (64-bit)
Usage:
helium-qt [command-line options]
Options:
-?
This help message
-version
Print version and exit
-alertnotify=<cmd>
Execute command when a relevant alert is received or we see a really
long fork (%s in cmd is replaced by message)
-alerts
Receive and display P2P network alerts (default: 1)
-blocknotify=<cmd>
Execute command when the best block changes (%s in cmd is replaced by
block hash)
-blocksizenotify=<cmd>
Execute command when the best block changes and its size is over (%s in
cmd is replaced by block hash, %d with the block size)
-checkblocks=<n>
How many blocks to check at startup (default: 500, 0 = all)
-conf=<file>
Specify configuration file (default: helium.conf)
-datadir=<dir>
Specify data directory
-dbcache=<n>
Set database cache size in megabytes (4 to 4096, default: 100)
-loadblock=<file>
Imports blocks from external blk000??.dat file on startup
-maxreorg=<n>
Set the Maximum reorg depth (default: 100)
-maxorphantx=<n>
Keep at most <n> unconnectable transactions in memory (default: 100)
-par=<n>
Set the number of script verification threads (-8 to 16, 0 = auto, <0 =
leave that many cores free, default: 0)
-pid=<file>
Specify pid file (default: helium.pid)
-reindex
Rebuild block chain index from current blk000??.dat files on startup
-reindexaccumulators
Reindex the accumulator database on startup
-reindexmoneysupply
Reindex the HLM and zHLM money supply statistics on startup
-resync
Delete blockchain folders and resync from scratch on startup
-sysperms
Create new files with system default permissions, instead of umask 077
(only effective with disabled wallet functionality)
-txindex
Maintain a full transaction index, used by the getrawtransaction rpc
call (default: 0)
-forcestart
Attempt to force blockchain corruption recovery on startup
Connection options:
-addnode=<ip>
Add a node to connect to and attempt to keep the connection open
-banscore=<n>
Threshold for disconnecting misbehaving peers (default: 100)
-bantime=<n>
Number of seconds to keep misbehaving peers from reconnecting (default:
86400)
-bind=<addr>
Bind to given address and always listen on it. Use [host]:port notation
for IPv6
-connect=<ip>
Connect only to the specified node(s)
-discover
Discover own IP address (default: 1 when listening and no -externalip)
-dns
Allow DNS lookups for -addnode, -seednode and -connect (default: 1)
-dnsseed
Query for peer addresses via DNS lookup, if low on addresses (default: 1
unless -connect)
-externalip=<ip>
Specify your own public address
-forcednsseed
Always query for peer addresses via DNS lookup (default: 0)
-listen
Accept connections from outside (default: 1 if no -proxy or -connect)
-listenonion
Automatically create Tor hidden service (default: 1)
-maxconnections=<n>
Maintain at most <n> connections to peers (default: 125)
-maxreceivebuffer=<n>
Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)
-maxsendbuffer=<n>
Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)
-onion=<ip:port>
Use separate SOCKS5 proxy to reach peers via Tor hidden services
(default: -proxy)
-onlynet=<net>
Only connect to nodes in network <net> (ipv4, ipv6 or onion)
-permitbaremultisig
Relay non-P2SH multisig (default: 1)
-peerbloomfilters
Support filtering of blocks and transaction with bloom filters (default:
1)
-port=<port>
Listen for connections on <port> (default: 9009 or testnet: 19009)
-proxy=<ip:port>
Connect through SOCKS5 proxy
-proxyrandomize
Randomize credentials for every proxy connection. This enables Tor
stream isolation (default: 1)
-seednode=<ip>
Connect to a node to retrieve peer addresses, and disconnect
-timeout=<n>
Specify connection timeout in milliseconds (minimum: 1, default: 5000)
-torcontrol=<ip>:<port>
Tor control port to use if onion listening enabled (default:
127.0.0.1:9051)
-torpassword=<pass>
Tor control port password (default: empty)
-upnp
Use UPnP to map the listening port (default: 0)
-whitebind=<addr>
Bind to given address and whitelist peers connecting to it. Use
[host]:port notation for IPv6
-whitelist=<netmask>
Whitelist peers connecting from the given netmask or IP address. Can be
specified multiple times. Whitelisted peers cannot be DoS banned and
their transactions are always relayed, even if they are already in the
mempool, useful e.g. for a gateway
Wallet options:
-backuppath=<dir|file>
Specify custom backup path to add a copy of any wallet backup. If set as
dir, every backup generates a timestamped file. If set as file, will
rewrite to that file every backup.
-createwalletbackups=<n>
Number of automatic wallet backups (default: 10)
-custombackupthreshold=<n>
Number of custom location backups to retain (default: 1)
-disablewallet
Do not load the wallet and disable wallet RPC calls
-keypool=<n>
Set key pool size to <n> (default: 100)
-paytxfee=<amt>
Fee (in HLM/kB) to add to transactions you send (default: 0.00)
-rescan
Rescan the block chain for missing wallet transactions on startup
-salvagewallet
Attempt to recover private keys from a corrupt wallet.dat on startup
-sendfreetransactions
Send transactions as zero-fee transactions if possible (default: 0)
-spendzeroconfchange
Spend unconfirmed change when sending transactions (default: 1)
-disablesystemnotifications
Disable OS notifications for incoming transactions (default: 0)
-txconfirmtarget=<n>
If paytxfee is not set, include enough fee so transactions begin
confirmation on average within n blocks (default: 1)
-maxtxfee=<amt>
Maximum total fees to use in a single wallet transaction, setting too
low may abort large transactions (default: 1.00)
-upgradewallet
Upgrade wallet to latest format on startup
-wallet=<file>
Specify wallet file (within data directory) (default: wallet.dat)
-walletnotify=<cmd>
Execute command when a wallet transaction changes (%s in cmd is replaced
by TxID)
-windowtitle=<name>
Wallet window title
-zapwallettxes=<mode>
Delete all wallet transactions and only recover those parts of the
blockchain through -rescan on startup (1 = keep tx meta data e.g.
account owner and payment request information, 2 = drop tx meta data)
Debugging/Testing options:
-debug=<category>
Output debugging information (default: 0, supplying <category> is
optional). If <category> is not supplied, output all debugging
information.<category> can be: addrman, alert, bench, coindb, db, lock,
rand, rpc, selectcoins, tor, mempool, net, proxy, http, libevent,
helium, (obfuscation, swiftx, masternode, mnpayments, mnbudget, zero),
qt.
-gen
Generate coins (default: 0)
-genproclimit=<n>
Set the number of threads for coin generation if enabled (-1 = all
cores, default: 1)
-help-debug
Show all debugging options (usage: --help -help-debug)
-logips
Include IP addresses in debug output (default: 0)
-logtimestamps
Prepend debug output with timestamp (default: 1)
-minrelaytxfee=<amt>
Fees (in HLM/Kb) smaller than this are considered zero fee for relaying
(default: 0.0001)
-printtoconsole
Send trace/debug info to console instead of debug.log file (default: 0)
-shrinkdebugfile
Shrink debug.log file on client startup (default: 1 when no -debug)
-testnet
Use the test network
-litemode=<n>
Disable all Helium specific functionality (Masternodes, Zerocoin,
SwiftX, Budgeting) (0-1, default: 0)
Staking options:
-staking=<n>
Enable staking functionality (0-1, default: 1)
-hlmstake=<n>
Enable or disable staking functionality for HLM inputs (0-1, default: 1)
-zhlmstake=<n>
Enable or disable staking functionality for zHLM inputs (0-1, default:
1)
-reservebalance=<amt>
Keep the specified amount available for spending at all times (default:
0)
Masternode options:
-masternode=<n>
Enable the client to act as a masternode (0-1, default: 0)
-mnconf=<file>
Specify masternode configuration file (default: masternode.conf)
-mnconflock=<n>
Lock masternodes from masternode configuration file (default: 1)
-masternodeprivkey=<n>
Set the masternode private key
-masternodeaddr=<n>
Set external address:port to get to this masternode (example:
128.127.106.235:9009)
-budgetvotemode=<mode>
Change automatic finalized budget voting behavior. mode=auto: Vote for
only exact finalized budget match to my generated budget. (string,
default: auto)
Zerocoin options:
-enablezeromint=<n>
Enable automatic Zerocoin minting (0-1, default: 1)
-zeromintpercentage=<n>
Percentage of automatically minted Zerocoin (1-100, default: 10)
-preferredDenom=<n>
Preferred Denomination for automatically minted Zerocoin
(1/5/10/50/100/500/1000/5000), 0 for no preference. default: 0)
-backupzhlm=<n>
Enable automatic wallet backups triggered after each zHLM minting (0-1,
default: 1)
-zhlmbackuppath=<dir|file>
Specify custom backup path to add a copy of any automatic zHLM backup.
If set as dir, every backup generates a timestamped file. If set as
file, will rewrite to that file every backup. If backuppath is set as
well, 4 backups will happen
-reindexzerocoin=<n>
Delete all zerocoin spends and mints that have been recorded to the
blockchain database and reindex them (0-1, default: 0)
SwiftX options:
-enableswifttx=<n>
Enable SwiftX, show confirmations for locked transactions (bool,
default: true)
-swifttxdepth=<n>
Show N confirmations for a successfully locked transaction (0-9999,
default: 5)
Node relay options:
-datacarrier
Relay and mine data carrier transactions (default: 1)
-datacarriersize
Maximum size of data in data carrier transactions we relay and mine
(default: 83)
Block creation options:
-blockminsize=<n>
Set minimum block size in bytes (default: 0)
-blockmaxsize=<n>
Set maximum block size in bytes (default: 750000)
-blockprioritysize=<n>
Set maximum size of high-priority/low-fee transactions in bytes
(default: 50000)
RPC server options:
-server
Accept command line and JSON-RPC commands
-rest
Accept public REST requests (default: 0)
-rpcbind=<addr>
Bind to given address to listen for JSON-RPC connections. Use
[host]:port notation for IPv6. This option can be specified multiple
times (default: bind to all interfaces)
-rpccookiefile=<loc>
Location of the auth cookie (default: data dir)
-rpcuser=<user>
Username for JSON-RPC connections
-rpcpassword=<pw>
Password for JSON-RPC connections
-rpcport=<port>
Listen for JSON-RPC connections on <port> (default: 9019 or testnet:
19019)
-rpcallowip=<ip>
Allow JSON-RPC connections from specified source. Valid for <ip> are a
single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0)
or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified
multiple times
-rpcthreads=<n>
Set the number of threads to service RPC calls (default: 4)
UI Options:
-choosedatadir
Choose data directory on startup (default: 0)
-lang=<lang>
Set language, for example "de_DE" (default: system locale)
-min
Start minimized
-rootcertificates=<file>
Set SSL root certificates for payment request (default: -system-)
-splash
Show splash screen on startup (default: 1)
Updated less than a minute ago